| PRE-CLEANING
SYSTEMS FOR SEED-COTTON |
| Air
Fed Inclined Cleaner & Gravity Cleaner with Extractor
Unit |
- Most
versatile and efficient equipment, designed for
modern ginning systems of all capacities.
- May
be used as a Cleaner-cum-Air Separator in pneumatic
handling of seed-cotton for unloading as well as
cleaning or as a Hot Air Cleaner in drying system.
- Spiked
cleaning cylinders across individual round grid
bars ensure gentle treatment and free flow of seed-cotton
through the machine, adequate opening of cotton
and removal of all fine trash including dust, sand,
leaf, pepper, pins etc. before they get embedded
in the cotton.
- Incorporates
special sealing of shafts and all possible openings
to cut-off dust emission and allow high vacuum operation.
- Twin
or splatter box inlet for full width operation of
the cleaner.
|
Air-Fed Inclined Cleaner
|
Model
|
'NHAC'
800
|
'NHAC'
1100
|
NHAC'
1900 |
'NHAC'
2500
|
'NHAC'
3100 |
Width
|
760
mm (30")+
|
1065
mm (42")
|
1830
mm (72") |
2440 mm (95") |
3050
mm(120") |
|
|
|
|
-
The Unit is constituted of two sections-a cylinder
cleaning section and an extractor cleaning section.
Spiked cleaning cylinders carry the cotton across
round grid bars with wider gaps and strip the sticks,
stems, quarter burrs, immature motes, leaves and
other large impurities from the cotton which together
with some good cotton pass to the extractor section
and tare applied on a saw cylinder for reclamation
of the seed-cotton and sling-off of all trash material
through widely spaced grid bars. A brush cylinder
doffs the seed-cotton from saws and this together
with a spiked roller returns the reclaimed cotton
to the main stream in the cylinder cleaning section.
-
The
trash separated is disposed off by a conveyor.
-
Most
effective pre-cleaning and gentle action to prevent
staple degradation.
|
Gravity Cleaner with Extractor Unit
 |
Model
|
'NGCE'
|
'NGCE'
|
NGCE' |
Width
|
1830
mm (72")
|
2440
mm (96")
|
3050
mm (120") |
|
|
|
|
